Integrated PSE & PD,No power adapter required
5-Port Gigabit PD Switch With 4-Port PoE
TEG1105PD
Full Gigabit Ports
No power adapter
325m PoE
power supply relay
6KV
lightning Protection
Small & Delicate
5 Gigabit Ports, Integrated PSE & PD Design
The 5 ports of TEG1105PD are all gigabit ports, with 4 PoE OUT ports (ports 1 to 4) and 1 PoE IN port (port 5). The switch can be powered by the IEEE 802.3af/at compliant PSE through port 5 with an Ethernet cable, and supply power to such PDs as low-power APs and IP cameras through ports 1 to 4.
Support standard PoE power supply
Support powered by the IEEE 802.3af/at compliant PSE through port 5 with an Ethernet cable
5 Gigabit Ports
Gigabit speed without reduction within 200m, Stable transmission without dropping
As a relay, the switch can extend the data transmission distance to 325 meters at most and offer long-distance PoE power supply through multiple PoE ports. Suitable for medium and long-distance wired monitoring scenarios or low-power wireless coverage scenarios such as enterprise parks, factories, schools, etc.
Stable Transmission
Unstable Transmission
PoE Switch
A certain brand of PoE switch
IPCs
IPCs
1000M rate,
stable transmission of HD IPCs.
10M rate,
unstable transmission of HD IPCs.
Cut costs,Practical & Stable,Your Better Choice
TEG1105PD does not require independent power supply, just plug and play, no need to consider the power supply during the network deployment; in addition, there is no need to pull out multiple network cables from the PoE switch (PSE) in the data equipment room to supply power to multiple PoE powered devices (PD). Therefore, the network deployment cost can be greatly saved while ensuring the quality of the project.
325m long-distance PoE relay, No power adapter required, Easy to get power supply, Suitable & Practical for your networking.
Before Floor Weak Electric Well
Power Adapter
Data Equipment Room
*Take the school scenario as an example
After Floor Weak Electric Well
Data Equipment Room
*Take the school scenario as an example
6KV lightning protection, Stable operation in thunderstorm environment
This switch provides short circuit protection for PSE and 6 kV lightning protection for all ports, protecting the switch itself to operate steadily from surge and lightning damages in thunderstorms.
Small & Delicate,Easy to be installed in the weak electric/waterproof box
TEG1105PD has a compact shell, about the size of two splicing bank cards, and can be easily installed in a weak electric box or an outdoor waterproof box. All-steel shell, sturdy and durable.
APW6-S
86*86*35mm
Switch TEG1105PD
100*100*26mm
Switch TEG1105PD
100*100*26mm
Bank card
85.6*53.98mm
More Features
Quiet & Heat dissipation Steel Shell, Fanless Design, Low Power Consumption
Safer Network Construction Without Strong Electricity
Stable Operation Few failure points, easy maintenance